Week Deals limited, Just now
3/4 inch Solenoid Valve 12 V Coil in Pakistan
3/4 inch Solenoid Valve 12 V Coil in Lahore Pakistan
12V Solenoid Valve Coil 3/4 inch in Pakistan Featured here is Model 2W-250-25 of our brass valve line. This particular valve is a two-way, semi-direct lift valve with a normally closed operating position. This means that there are two ports in which media flows, the valve will open when the coil is energized and allow media to pass through. Removing the energy from the valve coil will close it and stop the flow. It works across various media such as hot water, air, gas, diesel fuel, Freon, weak acids and weak alkali. The valve features a heavy duty, solid brass body that’s sure to last in the most strenuous projects.
Features:
The port size is 3/4” female NPT threaded. This Electric Solenoid Valve can handle low viscosity fluids below 20 cst. The orifice size is 25mm and Cv value is 12. It can withstand pressure up to 115 psi (8 bar) and temperatures as low as 15°F and as high as 265°F. The seal material is FKM or Viton Rubber. This valve works in one direction and will not prevent media from moving backwards in the opposite direction. This specific valve has a 12 Volt DC coil with a voltage range that is -+ 10. The coil head is fitted with 5″ lead wires that can easily be connected with your own choice of terminals. The coils are not polarized, which mean that positive/negative does not matter when wiring them. The top of the coil features a label that indicates the valve type and specifications. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
Solar Panel junction Box Electronics RTV Silicone Rubber Sealing Glue in Pakistan
Solar Panel junction Box Electronics RTV Silicone Rubber Sealing Glue in Pakistan
Solar Panel junction Box Electronics RTV Silicone Rubber Sealing Glue in Hallroad Lahroe
8 Sensor Line Following Array in Lahore | MIcrosolution
Sensor Line Following Array in Lahore.
Setting the Jumpers
The array has two configurable options: I2C address and I2C pull-up voltage.
I2C address
If you need to change the address of the array, move the solder jumper to set A0 and A1. The silkscreen table gives a reference. Seen in the photo, the default address is 0x3E. For example, if you want to use address 0x70, move A1 to the ‘1’ position and leave A0 at ‘0’.
[happyforms id=”5763″ /]
XL4015 5A DC to DC CC CV Lithium Battery Step down Charging Board Led Power Converter Lithium Charger Step Down Module XL4015 E1 | Pakistan
3 Inch 12V DC Fan in Pakistan Hallroad Lahore
3 Inch 12V DC Fan Microsolution Hallroad Lahore
This Brush less DC Cooling Fans are operating at 12V with a dimension of 80x80mm. They are typically found in ATX Computer cases, servers, and other enclosed equipment but they can also be used in a variety of other projects requiring moderate airflow.
Features:-
Helicopter Coreless Micro DC Motor With Propeller Pakistan
Helicopter Coreless Micro DC Motor With Propeller Hallroad Microsolution Lahore.
2Pcs New DC 3.7V 48000RPM Coreless Motor Propeller for RC Aircraft Helicopter Toy Wholesale
Specification:
Description: